Parameter
Overall Dimensions
Download
Cooperation| GYP56-T Rev:20220427 | ||||||||||||||||
| Parameters | One-stage | Two-Stage | Three-Stage | |||||||||||||
| Efficiency at full load,about≈ | 92% | 85% | 70% | |||||||||||||
| Weight,about≈ | 0.5kg | 0.8kg | 1.1kg | |||||||||||||
| Backlash（Rated output torque*2%） | ≤30arcmin | ≤30arcmin | ≤45arcmin | |||||||||||||
| Recommended input speed | 3500rpm | |||||||||||||||
| Design life | ||||||||||||||||
| Installation position | Any | |||||||||||||||
| Protection class | IP54 | |||||||||||||||
| Working temperature | -15 ~ 90℃ | |||||||||||||||
| Noise(measuring distance=100cm with inputspeed=3000rpm) | ≤55dB | |||||||||||||||
| One-stage Ratio | Nominal output torque (N.m) | Max.Output Torque (N.m) | Max.Input Speed (rpm) | Moment of inertia kg*mm2 |
| 3.29 | 14.19 | 28.38 | 4658 | 15.06 |
| 3.94 | 14.68 | 29.36 | 5968 | 5.48 |
| 4.24 | 14.76 | 29.52 | 6589 | 4.67 |
| 5.09 | 15.28 | 30.56 | 8307 | 3.13 |
| 6.53 | 16.29 | 32.58 | 8988 | 2.60 |
| 7.71 | 16.58 | 33.16 | 10919 | 2.27 |
| 9.55 | 13.55 | 27.1 | 13000 | 4.30 |
| Two-Stage Ratio | Nominal output torque (N.m) | Max.Output Torque (N.m) | Max.Input Speed | Moment of inertia kg*mm2 |
| 10.84 | 20.27 | 40.54 | 4658 | 8.70 |
| 15.51 | 22.01 | 44.02 | 5968 | 5.04 |
| 20.03 | 23.03 | 46.06 | 8307 | 3.81 |
| 25.71 | 23.13 | 46.26 | 8988 | 2.51 |
| 32.72 | 22.24 | 44.48 | 10919 | 2.19 |
| 42.63 | 26.38 | 52.76 | 8988 | 2.46 |
| 62.33 | 26.38 | 52.76 | 13000 | 1.87 |
| Three-Stage Ratio | Nominal output torque (N.m) | Max.Output Torque (N.m) | Max.Input Speed | Moment of inertia kg*mm2 |
| 100(101.23) | 26.38 | 52.76 | 5968 | 6.446 |
| 250(256.23) | 26.38 | 52.76 | 10919 | 4.129 |
| / | ||||
| The Bearing Capacity on outputshaft | Force | Output speed | Stress point | |||||||||||||
| 100rpm | 300rpm | 1000rpm | ||||||||||||||
| Radial Force with axial-Force=0N | 540 | 375 | 250 | Middle of the KEY | ||||||||||||
| Axial Force with radial-Force=0N | 1630 | 1015 | 595 | Based on center of output shaft | ||||||||||||
| GYP56-T1- 56T one stage- Input flang round | 96.77 KB |
|
| GYP56-T1- 56T one stage- Input flang square | 97.71 KB |
|
| GYP56-T2- 56T two stages- Input flang round | 97.04 KB |
|
| GYP56-T2- 56T two stages- Input flang square | 97.99 KB |
|
| GYP56-T3- 56T three stages- Input flang round | 86.46 KB |
|
| GYP56-T3- 56T three stages- Input flang square | 87.39 KB |
|
| GYP56-T1- 56T one stage- Input flange round-LG | 81.94 KB |
|
| GYP56-T1- 56T one stage- Input flange square-LG | 82.88 KB |
|
| GYP56-T2- 56T two stages- Input flange round-LG | 82.05 KB |
|
| GYP56-T2- 56T two stages- Input flange square-LG | 83.2 KB |
|
| GYP56-T3- 56T three stages- Input flange round-LG | 81.06 KB |
|
| GYP56-T3- 56T three stages- Input flange square-LG | 82.39 KB |
|
Contact
(+1) 510-953-3478
Address
39899 Balentine Dr #200, Newark, CA 94560Copyright 2024 Copyright Fulling Motor (North America)
