Parameter
Overall Dimensions
Download
Cooperation| GYP56N Rev:20220721 | ||||||||||
| Parameters | One-stage | Two-Stage | ||||||||
| Efficiency at full load,about≈ | 92% | 86% | ||||||||
| Weight,about≈ | 0.3kg | 0.4kg | ||||||||
| Recommended input speed | 3500rpm | |||||||||
| Design life | 5000h | |||||||||
| Installation position | Any | |||||||||
| Protection class | IP54 | |||||||||
| Working temperature | -10 ~ 50℃ | |||||||||
| Noise(measuring distance=100cm with inputspeed=3000rpm) | ≤50dB | |||||||||
| Backlash（Rated output torque*2%） | ≤1° | |||||||||
| One-stage Ratio | Nominal output torque (N.m) | Max.Output Torque (N.m) | Max.Input Speed (rpm) | Moment of inertia kg*mm2 |
| 3.24 | 2.00 | 6.09 | 4700 | 4.09 |
| 3.96 | 2.00 | 5.9 | 6050 | 2.08 |
| 5.37 | 1.70 | 5 | 8800 | 0.88 |
| 6.19 | 1.50 | 4.6 | 10100 | 0.63 |
| / | ||||
| Two-Stage Ratio | Nominal output torque (N.m) | Max.Output Torque (N.m) | Max.Input Speed | Moment of inertia kg*mm2 |
| 10.68 | 6.4 | 12.6 | 4700 | 4.20 |
| 15.61 | 7.4 | 15.1 | 6050 | 2.04 |
| 20.17 | 9.2 | 14.8 | 6050 | 1.97 |
| 25.88 | 11.8 | 19 | 6050 | 1.92 |
| 35.05 | 10.1 | 19 | 8800 | 0.8 |
| The Bearing Capacity on outputshaft | Force | Output speed | Stress point | |||||||
| 100rpm | 300rpm | 1000rpm | ||||||||
| Radial Force with axial-Force=0N | 515 | 355 | 240 | Middle of the KEY | ||||||
| Axial Force with radial-Force=0N | 1460 | 935 | 555 | Based on center of output shaft | ||||||
| GYP56-N1-56N one stage- Input flange square | 84.76 KB |
|
| GYP56-N1-56N one stage- Input flange round | 83.07 KB |
|
| GYP56-N2- 56N two stages- Input flange round | 81.52 KB |
|
| GYP56-N2-56N two stages- Input flange square | 83.23 KB |
|
| GYP56-N1- 56N one stage- Input flange round-LG | 78.51 KB |
|
| GYP56-N1- 56N one stage- Input flange square-LG | 79.63 KB |
|
| GYP56-N2- 56N two stages- Input flange round-LG | 78.73 KB |
|
| GYP56-N2- 56N two stages- Input flange square-LG | 79.95 KB |
|
Contact
(+1) 510-953-3478
Address
39899 Balentine Dr #200, Newark, CA 94560Copyright 2024 Copyright Fulling Motor (North America)
